Close
    Search Search

    How to unlock iPhone with passcode

    How to unlock iPhone with forgotten code

    How to unlock iPhone with passcode

    if t'interessa capire how to unlock iPhone with forgotten code, you well be happy to know that you can achieve this in a short time by taking advantage of the functionality Find my iPhone Apple paired with your iCloud account.

    If you have never heard of it, "Find my iPhone" is the anti-theft solution from Apple, designed to carry out emergency operations on devices of the "bitten apple", including the remote restoration of the same.



    Clearly, it is essential that the function has been previously enabled on the device on which to act: this happens automatically during the initial configuration phase of the "iPhone by". So, unless you have not manually disabled "Find my iPhone", it is likely that the alarm is active on your device.

    Another essential requirement for this procedure to work is that the phone to be unlocked is switched on and connected to the Internet.

    Having clarified all the necessary requirements to unlock the smartphone using "Find my iPhone", it is good to inform you of a non-negligible aspect of the matter: the unlocking operation takes place by restoring the phone, which, consequently, involves the loss of all data present on it.

    Obviously, if you have previously made a backup, you can easely restore it during the initial configuration phase of the smartphone and thus get your data back.

    Having clarified this aspect too, let's finally take action. First of all, connect to the iCloud website using the browser you prefer and log in to the portal, using the credentials of your Apple ID. If necessary, finalize the login using the two-factor authentication procedure.

    If this is your first time accessing iCloud, specify the language and time zone you prefer to use and click on the button Save. Once this is done, press the icon Find iPhone located in the control console that appears on the screen, re-enter the Password of your Apple ID and click on the button Log in.



    How to unlock iPhone with passcode

    If everything went smoothly, you should be shown a map containing the location of the devices paired with the Apple ID through which you logged in. Now, click on the item All devices (top), select the iPhone name that you intend to unblock from the list that is proposed to you and, to start restoring the phone, first click on the icon andnitialize the iPhone and then on the button andnitialize. Remember, once again, that this well result in the total loss of saved data present on the phone.

    Once the reset phase is complete, the previously active unlock code well be deleted and the iPhone well be restarted automatically, in order to allow you to carry out the initial device configuration procedure again.

    First, you well be asked to enter the password of theApple ID previously associated (it is the characteristic security measure of "Find my iPhone") and, subsequently, you well have to specify whether to configure the device as a new iPhone or whether to restore it from a previous backup.

    In the event that you are unable to carry out the procedure I have just described, you can ask for help to remove the activation lock, with the help of Apple's customer care consultant, starting the appropriate procedure from the Apple website, as I have indicated in this other guide.

    If you need an extra hand about the initial configuration procedure of the iPhone, the guide I made specifically on the subject could be useful.


    If, for one reason or another, you are unable to unlock the iPhone using "Find my iPhone", you can do the same using iTunes: what you have to do is put the phone in the special DFU mode (in order to bypass the system bootloader), connect the device to the computer via Lightning cable and, after opening iTunes, choose to Restore itRestore and update it: I explained everything to you in detael in my guide on how to put iPhone in DFU.


    How to unlock iPhone with PUK code

    How to unlock iPhone with passcode

    After entering an incorrect PIN code three times, your iPhone froze, showing you the prompt for the PUK code? Don't worry, the solution to your problem may be a lot simpler than it sounds.

    If you've never heard of it, the PUK code (or Personal Unblocking Key) is an 8-digit code, which is used to unlock the SIM card after entering the PIN code incorrectly 3 times. This code is provided directly by the operator and cannot be changed: for this reason, knowing it and above all remembering it can be quite an arduous undertaking.

    Retrieving the PUK code to unlock the SIM contained in the iPhone (and therefore the entire device), is not at all difficult: this code, in fact, can be found in various ways: below I ellustrate the most common ones.

    • From the sales package of the SIM - the PUK code is printed in correspondence with the item PUK / PUK code attached to the plastic card in which the SIM was embedded at the time of purchase. To view it, you may need to remove the protective varnish applied to the code, using a coin.
    • From the Do It Yourself online area - some operators make the SIM PUK code avaelable directly in the dedicated online personal area. Generally, this information is found in the section on managing the SIM card.
    • Through customer service - alternatively, you can retrieve the SIM PUK by contacting your carrier's customer service, by phone or by going to a shop. In that case, remember to bring valid ID and your SIM card with you so that you can easely retrieve your ICCID.

    For specific information about the steps to take to recover the SIM PUK, you can take a look at the specific guides I have dedicated to the topic: how to recover PUK TIM, how to recover PUK Vodafone and how to recover PUK Wind. If you have a SIM from another provider, my generic guide on how to recover the PUK code may be useful.



    How to unlock iPhone with passcode

    In any case, once you have obtained the 8-digit code, all you have to do is enter it when turning on the iPhone and press the button Unlock: after a few moments, you well be asked to specify a new PIN for the SIM, to be entered twice consecutively, when requested. Once you have finished resetting the PIN code, you can go back to using your phone as usual.

    How do you say? You entered the PUK code incorrectly 10 times, so now the iPhone is permanently blocked by it? In that case, you need to take care of the SIM replacement by contacting a physical store and explaining your problem.

    The positive aspect of the matter, however, is that the PUK code lock is a security measure linked exclusively to the SIM card: it is sufficient to remove it from the phone to be able to unlock and reuse it, if necessary, with another SIM (or without , if you deem it appropriate).

    If you have never extracted the SIM from the iPhone before, you can take a look at my guide on how to remove the SIM from the iPhone, in which I have shown you the precise steps to take in order to perform this operation in all safety.

    How to unlock iPhone with IMEI code

    How to unlock iPhone with passcode

    You bought a used iPhone and, after using it for a whele, you realized that the SIM inside it never managed to get cellular field. Suspicious of this situation, you immediately checked the andMEI code to check if it was a stolen iPhone and, unfortunately, the result was what you feared most.

    The device, in fact, has been blocked via IMEI code and now you don't have the faintest idea of ​​what to do to get out of this unwelcome situation. The possible cases are mainly two: the phone is stolen, or the previous owner has not paid all the purchase installments of the device.

    If you suspect that theiPhone is stolen and that, therefore, the IMEI block occurred following the complaint made by the owner of the mobele phone, sporgi complaint happened as soon as possible, by going to the nearest station of the police or of police. Remember to bring your mobele phone and all the purchase documentation in your possession and to report the incident as soon as possible: if you do not, you could run into rather serious trouble, risking being accused of receiving stolen goods or other criminal offenses. .

    Clearly, in this case, the iPhone in your possession well be returned to the rightful owner (the only one who can perpetrate an unlock request from the operators); with a bit of luck, you may also receive a refund on the cost of purchasing the stolen phone.

    If, on the other hand, the previous owner of the iPhone in question has not paid all the installments of the device, you must contact customer service of the telephone operator who has blocked the device and, after having explained the situation, provide all the instructions that well be provided to you to remedy the problem. I remind you of the telephone numbers to contact the main mobele phone operators: 119 to TIM190 to Vodafone155 to wind133 to Three192 193 to Fastweb and 177 to andliad.

    For more information on the steps to take to unlock a phone locked via IMEI as an operator, you can rely on the advice I gave you in my specific guide on the subject.

    In case of problems

    How to unlock iPhone with passcode

    If, after slavishly following the instructions I gave you throughout this tutorial, you stell faeled to unlock an iPhone with passcode, I recommend, as a last resort, to contact Apple, in order to receive support on the problem you encountered.

    Depending on your preferences (and possibly the type of warranty your device is covered by), you can choose to contact the technical staff in different ways.

    • Via telephone, calling the number 800 915 904, active from Monday to Friday from 08:00 to 19:45.
    • Online, by linking to this website.
    • Using theApple support app, avaelable for free on the App Store.
    • Su Twitter, following the account @AppleSupport and sending it a direct message (in English).
    • By going to a Apple Store or in one Authorized ifrvice Center Apple near you (you can get the list of Apple Stores and Authorized Centers via this web page).

    In any case, remember to keep the serial number of the iPhone on which you have encountered your problem: this information well be asked by the support team both to verify any warranty attached to the device, and for diagnostic purposes.

    The serial number can be easely retrieved from the sales package iPhone. If you do not find it, you can trace this information using the Apple ID management page: after logging in to it using the credentials associated with the iPhone of your interest, locate the latter in the section devices and click on his name (With art. iPhone in ).

    For further information on the contact methods provided by Apple, I refer you to reading my specific guide on the subject, in which I was able to clarify everything in great detael.

    How to unlock iPhone with passcode

    add a comment of How to unlock iPhone with passcode
    Comment sent successfully! We will review it in the next few hours.